|
RUBBER
COMPOUNDED SHEETS and SYNTHETIC RUBBER SHEETS
(Proven Relaibility for joining needs)
Rubber Sheets are used got joining between
flanges and/or similar jpoints sunjected to pressutes of water/
air/ low pressure steam upto 3.5Kg/cm²
in steel mills, fertilizer industries, chemical & pharmaceutical
plants, food etc. and HINDUSTAN INDUSTRIAL CORPORTAION Offers solid
black color vulacnised sheet processing excellent physical properties,
resistant to air, water, steam & compression set.
Range
| . |
GRADE
|
Thickness
Range (mm)
|
Dimension
Size wx1
|
Finish
of Sheet
|
App.
wt (kgs) Per Sheet (1mm thick)
|
Characteristics
|
| 1. |
Natural
Rubber
Corrugated
Chequered/Plain
Colored- Blue/Red/ Green
High Pressure
* General Purpose |
1.5 to 25.0
|
1000 X 2000
|
Moulded
|
4 + 10%
|
Resistant
to temp. (hot air) -25°C to 60°C, hot water upto 50°C,
steam upto 70°C, moderate resistance to acetic acids, alkalines,
vegetable oils, gases like oxygen, mitrogen & sulphurdioxide
and sea water. |
| 2. |
Synthetic
Rubber SBR (Stryene-butadiene)
(Only in Plain Design)
(a) 50%
(b) 75%
(c) 100%
* General Purpose
(Non Oil resistant) |
1.5 to 25.0
-do-
-do-
-do-
|
1000 X 2000
-do-
-do-
-do-
|
Moulded
-do-
-do-
-do-
|
3.3 + 10%
-do-
-do-
-do-
|
Resistant
to temp. (hot air) -25°C to+ 70°C, hot water upto 90°C,
steam upto 120°C, moderate resistance to acetic acids, alkalines,
vegetable oils, gases like oxygen, nitrogen & sulphurdioxide
and sea water. |
| 3. |
Synthetic
Rubber
(a)
CR
( 50% Neoprene)
(b) CR
(50% Neoprene)
(c) (100% Neoprene)
* Flame & Solvent Reistant
|
1.5 to 25.0
-do-
-do-
|
1000 X 2000
-do-
-do-
|
Moulded
-do-
-do-
|
1.6m²
+ 10%
3.2 + 10%
3.1 + 10%
|
Resistant
to temp. (hot air) -30°C to+ 100°C, hot water upto 100°C,
steam upto 125°C, moderate resistance to fatty acids, mineral
oils, gases like chlorine ozone & sulphurdioxide and good
resistance to alkalies, vegetable oils, gases like oxygen, nitrogen
& sulphurdioxide and sea water.Also resistant to fod where
nontoxic grades are required. |
| 4. |
Synthetic
Rubber MQ (Silicon)
*
Super Heat Resistant
|
1.5 to 25.0
|
1000 X 2000
|
Moulded
|
4 + 10%
|
Unique
resistant to temp. (hot air) -450°C, Sunlight water ozone,
food & othe gases and good resistance to acids. |
| 5. |
Synthetic
Rubber EPDM (Ethylenepropylene)
*
Super Heat Resistant
|
1.5 to 25.0
|
1000 X 2000
|
Moulded
|
4 + 10%
|
Resistant
to temp. (hot air) -10°C upto+ 170°C, hot water upto
100°C, steam upto 160°C, moderate resistance to fatty
acid, sulphuric acid, hydrochloric acid, nitric acid, alkalies,
vegetable oils, almost all gases and sea water. |
Hardness (IRHD):
Type A-50 to Type B-66 TO 80: Tolerence in size ± 1%, Tolerence
in thickness ± 2.5%; Tolerence in hardness:±5%
* Manufacture in other grades are also undertaken on enquiry/order
than stated above.
Also manufacture Rubber Mats (Electrical)
with voltage resistance to 33000V for floor coverings around electrical
panels in chequered, antiskid fluted & plain finish as per chart
appended below
|
Thickness
Range
(mm)
|
Design
|
Dimension
Size
(mm)
|
|
06.50
|
Plain
|
0.900
x 1800 & 1000 x 2000
|
|
06.50
|
-do-
|
-do-
|
|
06.50
|
Chequered/
corrugated or plain
|
-do-
|
|
06.50
|
-do-
|
-do-
|
|
06.50
|
-do-
|
-do-
|
|
06.50
|
-do-
|
-do-
|
|
06.50
|
-do-
|
-do-
|
|
